HyLoft 00625 Installation Guide download pdf (Page 3)

ATTACH DOWNRODS

and SUPPORT BARS

PLACE AND ATTACH GRIDS

Ceiling Joist

Connect two-Piece

Downrods to center

hole in Ceiling Angle

Insert end plugs

before attaching

Connect Support Bars

to Downrods

Lay both 15" Wire Grids (A)

evenly on Support Bars and

attach as shown. Note: Long

grid wires are on the bottom.

Lay 13" Wire Grid (B) on top of

Support Bars, between the two

15" grids (A), and Bolt Together

using 2 bolts (J), washers (L)

and nuts (K) on each side.

Adjust

Downrods

to Desired

Length

Sticker

four-wire clusters

nearest downrods

You have now completed the installation and are ready to load your new HyLoft Storage Unit.

(Maximum 250 lbs. per 45" x 45" unit, evenly distributed). Place the sticker provided on a

support bar for easy reference information.

Periodically (at least annually) check all connections to ensure that they remain tightly fastened.

Installing Two HyLoft 45 x 45 Units:

Follow the instructions above. Multiple Units may be joined together by using tie straps provided.

v.44010306 Page 4 of 15

1 2 3 4 5 6 7 8 9

No comments

HyLoft 00625 Installation Guide Page 3